Sector
Industrial
End-use
Process
Project Number
ET 07.18
Project SummaryIn most plastic fabrication processes, plastic resin has to be dried to a specific humidity level before using it for fabrication. The technology under consideration, a new type of dryer for plastic resins, uses a revolving circular bed of desiccant material in a honeycomb structure....
Sector
Residential
End-use
HVAC
Project Number
PGE 0710
Project SummaryThis project analyzes and tests the integration of night ventilation cooling technology into a standard heating, ventilation, and air conditioning (HVAC) system. Night ventilation systems automatically ventilate houses using the normal air handler, supply, and return duct system, as...
Sector
Other
End-use
Project Number
PGE 0713
Project SummaryThis Commercial air conditioning rooftop units (RTUs) are typically implemented as single zone, constant volume systems that cycle in response to a thermostat signal. Much of the energy used by the RTU is needed to power an indoor fan. (Fan power is roughly a function of the cube of...
Sector
Other
End-use
Project Number
PGE 0703
The California IOUs and SMUD (California Utilities) are pleased to announce their release of the “Super Lamp” Specification. This is a joint effort with California Lighting Technology Center (CLTC) and the Natural Resources Defense Council (NRDC) and was designed around the comments received...
Sector
Commercial
End-use
Whole Building
Project Number
PGE 0712
Project Summary The hypothesis guiding this project was that a deemed savings model can be created based on the analysis and simplification of variables involving the operation of a small energy management system (EMS)—including market segment, load type, climate zone, building schedule, and...
Sector
Commercial, Agricultural
End-use
Other
Project Number
ET 07.07
Project SummaryA “control interlock” to stop air entering a dairy milking vacuum system. When milking cows, a pulsation unit lets atmospheric air into chambers at the milking claw which makes a gripping motion and then milk flows from the cow. When milk stops flowing, existing controls detach the...
Sector
Commercial
End-use
Lighting
Project Number
PGE 0726
Project SummaryThis report summarizes the third phase of an LED street lighting assessment project conducted to study the applicability of LED luminaires in a street lighting application. In Phase II, fifteen 78-watt LED luminaries replaced a like number of 121-watt high-pressure sodium (HPS)...
Sector
Residential
End-use
Process
Project Number
DR 07.01
This report assesses the demand response potential from single family residential swimming pool pumps. Pool pump profiles were developed based on site monitoring data for Inland, Coastal and Desert regions of Southern California Edison service territory.The resulting profiles produced an estimated...
Sector
Commercial
End-use
Lighting
Project Number
PGE 0716
Project SummaryThis project examines the energy efficiency potential and viability of lighting emitting diode (LED) lighting at an underground parking garage at a major hotel in San Francisco. Light-emitting diode (LED) lights are emerging as a viable alternative for outdoor locations such as...
Sector
Commercial
End-use
Lighting
Project Number
PGE 0722
Project SummaryReplacing the fluorescent bulbs that light frozen food and refrigerated cases in supermarkets with light-emitting diodes (LEDs) cuts electrical consumption by nearly half and results in more consistent lighting, lower maintenance costs, and longer lighting life. In this study, the...