Sector
Commercial
End-use
Process Loads
Project Number
ET14SCE7110
Feasibility phase for a demonstration project with the objective is to link building energy retrofits with electric transportation system linking buildings to public transportation. To scale adoption of key technologies including energy efficiency, energy storage, distributed generation, charging...
Sector
Commercial
End-use
Lighting
Project Number
ET16SCE1040
This project will evaluate the efficacy, efficiency and operational nature of LED’s which offer color adjustability. These products are used in a range of applications but are typically selected to offer lighting color temperatures to set mode/ambiance or to balance human bio-rhythms. Testing...
Sector
Commercial
End-use
Lighting
Project Number
ET15SCE8050
ETP studies (ET11SCE1010 and ET11SCE1011) showed significant energy savings potential. This Scaled Field Placement (SFP) effort will take advantage of the Lighting Innovations project intended to test incentive midstream and upstream...
Sector
Commercial
End-use
Lighting
Project Number
ET15SCE8040
This project is the follow-up to the ETP assessment for LED Tube Replacement Lamps with an SFP that will provide measurement and verification of the installations through the limited release to the PRP area as a Custom...
Sector
Commercial
End-use
HVAC
Project Number
ET16SDG1071
The objective of this report is to calculate electric savings achieved by the fuel cell waste heat recovery absorber system installed at UCSD. The data collected from November 15th 2016 to September 11th 2017 from the fuel cell, absorber, and electric chillers were used. The data was then used to...
Sector
Commercial
End-use
Plug Load
Project Number
ET17SDG8021
This report summarizes the conducted research, sources and findings. One finding is that available information is indeed not sufficiently detailed and up to date to accurately quantify power management software savings potential. A larger scale study remains nevertheless questionable, for several...
Sector
Commercial
End-use
Lighting
Project Number
ET15SDG8012
Phase One of San Diego Gas and Electric’s Digital Billboard Project “Digital Billboard Use in California: ET14SDG8011” consisted of a description of digital billboards’ technology, preliminary energy profile, and a California market characterization. The final report,...
Sector
Commercial
End-use
Process Loads
Project Number
ET15SCE1030
This laboratory assessment compares the performance of low-temperature horizontal display case with natural refrigerant (propane or R-290) and conventional refrigerant...
Sector
Commercial
End-use
HVAC
Project Number
DR16.05
A retrofit device for HVAC rooftop units that can respond to DR signals. The controller can either shut off the unit or it can limit or vary the speed of the indoor fan and...
Sector
Commercial
End-use
Plug Loads and Appliances
Project Number
ET14SCE1160
This project will provide a better understanding of emerging technologies and their energy related performances, helping us to achieve greater efficiency. loT technology and other advanced energy management systems potentially offer both advantages and challenges. A more thorough review of plug...